Recent Mold Remediation Posts

How To Clean and Prevent Bathroom Mold and Mildew

11/27/2019 (Permalink)

Bathroom mildew is a common household issue and one that can be resolved with both natural and commercial cleaners.

Bathroom mildew and mold likely stem from an underlying humidity problem. Fortunately, most of these issues can be resolved using a bathroom fan. However, even after installing preventative measures, your bathroom might still develop mildew in the form of soap scum and other minor issues. Thankfully, there are at least three ways to clean and remove the typical mold and fungus found in bathrooms.

Natural solutions
Chemical solutions
Professional services

Natural Solutions
If you are looking for a natural solution, then look no further than baking soda, vinegar, and lemon. For a simple remedy to cleaning mildew from grout and tile, you can sprinkle the surface with baking soda and then apply a generous amount of white vinegar. Wait at least five minutes, and then scrub the grout with a tile brush. The combination of these two ingredients creates a cleaning compound that makes the mildew easier to remove. Another option is to use the same two ingredients above and add lemon juice. Mix the three ingredients into a paste. Rub the compound over the tile grout and wait five minutes before scrubbing with a brush. The paste is excellent for vertical surfaces. However, do not use this mixture on marble because it can stain or damage the stone.


Chemical Solutions
Next, if you don't want or need a natural remedy, or your bathroom mildew problem is extensive, then you might prefer a commercial chemical cleaner. However, while these products are effective and readily available, you should only use them in well-ventilated spaces.


Professional Services
Some mildew and mold problems are too extensive for a typical home remedy. If your problem seems too large for you, then contact a mold remediation service in Knoxville, TN. They are trained, licensed and certified for such a task.


Bathroom mildew is a common household issue and one that can be resolved with both natural and commercial cleaners. However, some problems are beyond the capabilities of over-the-counter remedies, which means a professional service might be needed.

Controlling Black Mold Growth in Your Shower

11/20/2019 (Permalink)

Cleaning it up immediately can prevent a mold disaster.

You may have enough to clean off your shower walls with residue from soap, shampoo, conditioner, and dirty fingerprints. Unfortunately for some in Knoxville, TN, there is the additional worry of cleaning away the black shower mold that may darken corners around the edges of a shower stall, sliding door track or ceiling. As long as the mold is on the surface, there is something you can do about it.


3 Ways To Clean Surface Mold
There are a few ways a homeowner can perform surface mold cleanup from non-porous areas themselves. Here are some guidelines to that regard.


1. Vinegar Solution. Use a mixture of one-part water to two parts white vinegar – a natural anti-fungal. Mix in a spray bottle and apply liberally to the affected area. You can also use the vinegar straight and leave it to dry without rinsing, and the smell will dissipate shortly.


2. Borax solution. Mix one cup of Borax and one gallon of warm water. Pour into a spray bottle and apply to the moldy surface. As a natural fungicide, Borax can be effective in the cleaning of shower mold.


3. Bleach solution. Household chlorine bleach is effective in removing black mold from non-porous surfaces but can be quite toxic, and care should be taken to minimize breathing the fumes or contact with skin. No need to rinse away unless children or pets might come in contact with treated areas.


Cleaning Instructions
For each of these methods, spray the solution liberally on mold and scour with a scrub brush or toothbrush to loosen mold from grout and corners. Wipe down with a cloth or sponge and discard the item afterward. Rinse and wipe away. Repeat as needed.


Occasionally you may discover that the mold damage is more than surface deep and needs attention from professional black mold cleanup or mold remediation specialists in Knoxville, TN. When cleaning your bathroom, however, keep your eye open for shower mold. Cleaning it up immediately can prevent a mold disaster.

What To Know About Mold

11/7/2019 (Permalink)

If you believe you have mold in the home then it’s best to schedule a mold inspection as quickly as possible.

If you believe you may have a mold problem at your Knoxville, TN, home, then it’s important to schedule a mold inspection with your local mold remediation service as quickly as possible. These professionals can deal with all types of mold, including the dreaded black mold that so many people tell stories about. Fortunately, mold in the home doesn't have to be as scary and rumor suggests. Here are a few things you may want to know.


1. Mold is a Fungus
One of the first things to understand is that all mold is a fungus. This means they live off of absorbing other organic materials and reproduce via spores. Mold is often found in dark areas with high moisture levels such as a bathroom, attic, kitchen, or basement. Fortunately, there are a few tests your professional can run to find and identify any mold that may be in your home.


2. Not All Molds Are Toxic
Just because you’ve decided to schedule a mold inspection doesn’t mean you need to panic. Mold may be pesky, but not all molds are toxic. Some have even helped researchers create medicines like penicillin. While it’s true other molds have been known to cause allergies, it’s best to allow the professional inspecting your home to determine the spore type, and listen to any recommendations they have for removal and future mitigation.


3. Mold’s Identifying Traits
When identifying house mold there are several tests your professional may run. These may include taking a sample to send to a lab, but they may also look at the mold’s color and growth pattern, as well as the growth location and conditions when determining what type it is.


If you believe you have mold in the home then it’s best to schedule a mold inspection as quickly as possible. These professionals can find this fungus if it is growing and identify what type it is. Remember, just because you have a little mold growing doesn’t mean it’s toxic. Let your professional know about any concerns you may have, and follow their recommendations for remediation and future mold prevention.

Mold in the House When It Rains

9/26/2019 (Permalink)

Water leaking from ceiling due to roof damage

Being a homeowner in Karns,TN, comes with a large set of responsibilities for maintaining or increasing the value of the house. If you start noticing mold growing or smell a musty smell when it rains, it’s important that you figure out where the moisture problem is located as soon as possible.
Dampness can create large issues when left alone for too long. You might be tempted to think that wiping up what water you can see is enough to fix the issue. Unfortunately, unless you know for sure where the water is coming from, there is a good chance you have a leak somewhere unseen that could potentially lead to future disaster.

Mold Locating

Seeing black mold consistently show up in one area makes your job easier when it comes to figuring out where your house is leaking. If it’s only growing in a corner in the upstairs bedroom or in the basement after it rains, you can rule out plumbing issues and go right to the source, be it a leaky roof, foundation, or crawlspace. Check these common places to for leaks:

  • Chimneys
  • Old window frames
  • Cracked basement walls/floors
  • Areas around the house with poor drainage

Of course, if you have a new home that you know was built solidly, there is a chance that there is too much humidity in the air inside, causing the mold to grow.

Mold Cleanup

Once you figure out where the water is leaking in, it’s time to clean up the black mold mess before it causes structural damage. If you know the problem is new and it’s a quick fix, clean up the mold using a disinfectant like bleach and repair the leaking area.
However, if you don’t know when the problem started or there’s a chance the mold has gotten inside the walls of the home, it is recommended that you work with a professional black mold cleanup company. The pros can ensure that your home is fully restored, including any needed wall replacement, structural drying, and leak repair. Give yourself peace of mind that your home is clean and ready for the next big downpour.

What You Can Expect From Your Property Policy

9/17/2019 (Permalink)

This knowledge allows you to plan better by purchasing other policies to supplement your coverage.

A musty smell in your warehouse or office building in Knoxville, TN, is a good sign that mold is present somewhere in the building. You know you need remediation but may not know how you're going to pay for it. Your property coverage may pay for some of the damage, but it's good to know exactly what your commercial insurance policy says before you need it. Two terms to look for are fungus exclusion and limited fungus coverage.


Fungus Exclusion


If your policy has a fungus exclusion, mold damage may not be covered. As with most caveats, there are typically a few exceptions:

-Mold that occurs as the result of fire or lightning
-Mold that results from a specified cause of loss detailed in the policy
-Mold that results from a covered loss

While mold is unlikely to occur because of fire or lightning, other exceptions may be the key to getting your mold claim accepted. These exceptions usually fall under a limited fungus coverage clause in your commercial insurance policy.


Limited Fungus Coverage
Many property policies will serve as mold insurance if the growth is a direct result of another loss that is covered by the policy. For example, your building could sustain water damage from a roof leaf. As long as you do everything in your power to mitigate the damage, including calling certified remediation experts as soon as you know there's a problem, the cost of fixing the issue is probably covered by your policy. If mold grows before the remediation process is finished, the fungus mitigation is probably covered as well.


It is unwise to just assume your commercial insurance policy will automatically cover mold problems that occur in your building. You should read the policy thoroughly and direct any questions you have to your insurance agent. This knowledge allows you to plan better by purchasing other policies to supplement your coverage.

Do You Have Mold in Your Air Ducts?

6/20/2019 (Permalink)

You can trust SERVPRO of Cedar Bluff for your mold removal and remediation needs in your air ducts.

Keeping ahead of maintenance problems is an everyday part of owning a building in Knoxville, TN. The possibility of finding mold is always a concern. While it's not hard to detect on surfaces like walls or ceilings, it could be lurking unseen in your air ducts. While types of mold and their effects vary greatly, a toxic kind, such as black mold, could lead to issues for your tenants, client, or workers.

What To Look For

The signs of mold in ducts include:

• Black dust around the air vents
• Musty smells when you run the AC
• Itchy eyes and sneezing when indoors

Call a Professional

While it's possible to take steps to clean air ducts yourself, it's a good idea to consult with a professional mold remediation company to make sure the problem is eradicated safely and completely. Professionals will be able to inspect the ducts to determine the type of mold (and whether or not black mold is involved), and then use specialized treatments and equipment to handle the problem.

Keeping the Mold Away

Once the professionals have eradicated the problem, there are steps you can take to make sure the mold doesn't return. First, make sure to change the filters on your air conditioning system every 30 to 60 days. This will help to keep spores from building up in your system. Also, have a professional clean out the ducts at least twice a year. Besides giving you clean ducts, a professional HVAC technician will be able to spot any potential new problems before they start.

As a property owner, the last thing you want to worry about is mold, especially the more dangerous varieties like black mold. The best way to keep it out of your ducts is to be diligent. If you detect a problem, a call to a mold remediation professional may be your best bet.

You can trust SERVPRO of Cedar Bluff for your mold removal and remediation needs in Knoxville, TN.

4 Ways To Reduce the Spread of Mold Inside Your Home

5/29/2019 (Permalink)

Mold spores can travel easily through the air.

Mold thrives in moist environments and can be extremely destructive. Extensive contamination may require professional mold remediation. However, because the fungus is prevalent throughout the environment, eliminating its presence from your home may be extremely challenging. Fortunately, there are several strategies you can employ to control the problem and avoid spreading mold.

1. Control Humidity

Controlling moisture is a key prevention strategy. A humid environment indicates the presence of a high volume of water particles. Condensation on window sills and bathroom mirrors are symptoms of this issue.

To alleviate this problem, you should ensure windows are adequately sealed and employ a dehumidifier. You can also utilize bathroom and kitchen exhaust fans to reduce additional moisture buildup while bathing and cooking.

2. Utilize an Air Purifier

Mold spores can travel easily through the air. HEPA air filters are designed to capture microscopic organisms, including mold particles. Utilizing an air purifier that contains this type of filter can help you capture and kill spores, alleviating concerns about spreading mold inside your home.

3. Investigate Damp or Stained Areas

Mold can often breed undetected. Because many pipes are hidden behind walls, a large portion of your residence may be vulnerable to this issue. For this reason, you should promptly investigate any potential signs of a concealed leak, such as damp or bubbled walls, stained ceilings or warped flooring.

4. Promptly Clean up Damp Areas

If you detect a leak, promptly removing any wet items, including carpets, drywall and insulation, is vital. You should also quickly soak up pooled water and utilize fans to dry the affected space.

Routinely drying and cleaning damp areas around your kitchen and bathroom sinks is another important containment strategy. To prevent black mold infiltration inside your shower, you should also wipe down this structure after every use.

Spreading mold may be a concern for many homeowners in Cedar Bluff, TN. Efficiently controlling moisture can help everyone safeguard their homes from potentially destructive contamination requiring mold remediation.

3 Important Mold Damage Emergency Tips

3/8/2019 (Permalink)

It’s important to begin the mold cleanup process soon after mold is noticed in order to reduce the amount of damage that occurs.

3 Important Mold Damage Emergency Tips

If you spot mold damage in your home in West Haven, TN it can be easy to feel overwhelmed and uncertain about what to do next. However, reacting appropriately to black mold in your home can help to prevent major damage from occurring.

1. Keep Your Home Dry

A moisture problem is often a primary cause of mold growth in a home and eliminating the flow of water or decreasing the amount of humidity in a home can be helpful. To prevent water from causing more damage, it is sometimes helpful to turn off the water entirely. Using old towels to soak up large amounts of water can be helpful, though it’s often wise to throw them away after they’ve been used.

2. Contain the Mold

Although it’s not possible to contain every single spore of mold, preventing mold from spreading and growing in other areas of your home is important. Containment methods to prevent black mold growth can include turning off your home’s HVAC and not using fans to lessen the airflow in the home. Often, professionals in mold remediation can use more advanced methods to contain mold.

3. Begin Cleanup Quickly

Often, it’s important to begin the mold cleanup process soon after mold is noticed in order to reduce the amount of damage that occurs. Professionals can assist in removing damaged items from your home and can attempt to restore your belongings, though restoration isn’t always possible, and many items may need to be replaced if the damage is extensive. Providing information to your insurance company can often be helpful during the claims process, and it can be helpful to document the damage by taking photographs and writing down items that are damaged.

Although black mold can be detrimental to your home, knowing how to react can help you feel more in control of the situation. Keeping your home dry, taking steps to contain the mold and quickly starting the cleanup process are helpful steps to take if your home has been damaged by mold.

Wave Goodbye to the Mold in Your Front-Loader Washer

1/21/2019 (Permalink)

Mold in your front loader washer

3 Steps To Get Rid Of Mold And Nasty Smells In Your Front Loader

When you think of laundry, do images of line-dried sheets wave on a gentle breeze in your mind? Can you smell a trace of your favorite laundry detergent? You probably even have a favorite dryer sheet. All of these scents are designed to make your clothing smell fresh and clean. So, is it the end of spotless laundry from now on because you discovered that your washing machine is moldy or musty? No, it doesn’t have to be. Simply try the following steps to get rid of the mold and nasty smells in your front-loader in Cedar BluffK,TN .

1. Reach for the vinegar.

Run white vinegar in an empty machine to remove the mold smell and the residue attached to the inside of your machine’s drum. Use two cups of the liquid and the hottest water setting your machine has to kill the odor, mold, and mildew.

2. Select the baking soda.

It has long been known that baking soda can help brighten graying, dirty laundry, but did you know it can also help remove the residue hidden on the drum and top of the drain pipe of your washing machine? It only takes about a fourth of a cup in a cup of water. Just add it to your laundry, or put the solution in the detergent slot, and run the machine as normal.

3. Use some elbow grease.

After the vinegar and baking soda cycles, if you still find a few stubborn spots of discoloration, mold, or mildew, use a mixture of baking soda, vinegar and water to scrub them away. If the mold is present on the gasket, make sure to rinse with water after you gently scrub.

Yes, keeping your washing machine clean can be as easy as following these three simple steps. Even more surprising is the fact you can use vinegar once a month as a gentle mold preventative for maintenance. If you are unable to remove the offensive odor, consider calling in a professional mold specialist to find out where the fungus is growing. Don’t let mold take your clothing hostage, fight back today!

Managing Mold Damage

12/10/2018 (Permalink)

Mold Damage in Knoxville, TN

In as little as 48 hours, mold can quickly become a problem in your home or business when there’s a water intrusion, like a roof leak or leaking water lines. Mold can cause health effects and can also cause significant damage to your property.

Although every mold damage scenario is different requiring a unique solution, the general mold remediation process stays the same. The following steps illustrate a “typical” mold removal process.

Inspection and Mold Damage Assessment

Your property will be carefully inspected for signs of mold using various technologies to detect mold and hidden water sources. Mold feeds on cellulose and water and can be hidden from plain view.

Mold Containment

Various containment procedures will be placed to prevent the spread of mold, like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process.

Air Filtration

Specialized filtration equipment captures microscopic mold spores out of the air. SERVPRO technicians utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in progress.

Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. Antifungal and antimicrobial treatments will be used to eliminate mold colonies and help prevent new colonies from forming. Removing and deposing of mold-infested porous materials, like drywall and flooring, may be necessary to remediate heavy mold growth.

What happens if my stuff gets moldy?

12/10/2018 (Permalink)

Cleaning Contents and Belongs

SERVPRO Franchise Professionals clean your furniture, decorative items, curtains, and other restorable items affected by mold. They use a variety of cleaning techniques to clean and sanitize your belongings. They are also trained to remove odors and deodorization using fogging equipment.

Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may be removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business.

Mold spores are everywhere and will be in your home when you have a water damage. If you have a water damage in your home you may be prone to mold damage if you don't act right away and call SERVPRO of Cedar Bluff.

Do You Have Dirty Ducts?

8/5/2018 (Permalink)

Did you know your ventilation system is often the biggest culprit in poor indoor air quality? In most cases, the HVAC system has been operating for some time without much attention. Dirty ducts can circulate odors, contaminants such as mold, and irritating dust throughout your building or home.

A routine part of your local SERVPRO® Cedar Bluff Professional’s service is inspecting the heating, ventilation, and air conditioning unit (HVAC). Keeping the HVAC and ductwork clean can potentially extend the life-span of the equipment by allowing it to operate at peak condition, which may help save you money. Duct cleaning may not always be necessary.
In some circumstances, such as after a fire, smoke, or suspected mold growth, duct cleaning becomes an essential part of the cleanup process. In these cases, SERVPRO® of Cedar Bluff Professional can often restore the HVAC system and ductwork to pre-damage condition.

If you have a fuel-burning furnace, stove, or fireplace, the U.S. Environmental Protection Agency (EPA) recommends they be inspected for proper functioning and be serviced before each heating season to protect
against carbon monoxide poisoning.

The SERVPRO® Duct Cleaning System is proven and cost-efficient. Unlike the majority of duct cleaning services, your SERVPRO® Franchise
Professional uses a portable ventilation and air duct cleaning system to examine ductwork and make a clean sweep, removing years of dust and grime.

The process begins by using patented equipment, including a roto-scraper, which automatically adapts to the duct’s shape and diameter while traveling through the duct, removing debris and filth before vacuuming begins.

Next, a powerful push-pull air delivery and collection system transfer the debris from the ducting to a 16-gallon container.

Air is filtered through a HEPA filtration system, removing 99.97 percent of the particles in the airstream. HEPA filters capture debris and keep the indoor environment clean.

As an optional process, a sealant or coating product may be sprayed to address odor or microbial concerns.

Filters will either be cleaned or replaced to remove odor and dirt.

For more information on duct cleaning, or to schedule an appointment, contact your local SERVPRO® of Cedar Bluff Professionals today.

Destroy Odors with DEODORIZATION

7/9/2018 (Permalink)

Even a small fire can cause odors for years to come if the affected
areas are not properly cleaned and deodorized. Fire, smoke and soot
damage in your home or business can create unpleasant and potentially
permanent problems. As various materials burn, the smoke produced travels throughout the structure, leaving odorous residues and deposits on surfaces and in hard-to-reach places. Unless fast, professional action is taken, these residues and deposits can cause permanent damage to contents and may result in resurfacing odors.

With technicians certified by the Institute of Inspection, Cleaning, and Restoration (IICRC), SERVPRO® Of Cedar Bluff provides specialized services that can rid your home or business of offensive odors left by fire or smoke damage. SERVPRO® Of Cedar Bluff do not cover up lingering odors with a fragrance; they seek out and remove the sources of the odor. If you or a customer suffer a fire damage or some other accident and require deodorization services, contact SERVPRO® Of Cedar Bluff. Whether it’s fire, water, or mold damage, or just a stubborn odor that refuses to go away, we’ll help make it “Like it never even happened.”

What to do when mold strikes

6/11/2018 (Permalink)

Mold Damage Knoxville

When there’s a water intrusion, like a roof leak or leaking water line, mold can quickly become a problem in your home or business. Mold can cause health effects and can also cause significant damage to your property. Fortunately, SERVPRO® of Cedar Bluff has the training, protective gear, and specialized equipment necessary to handle your mold problem. Although every mold damage scenario is different requiring a unique solution, the general mold remediation process stays the same. The following steps illustrate a “typical” mold removal process.

Call the Team in Green
The mold cleanup and restoration process begins when you call
SERVPRO® of Cedar Bluff. A representative will ask a series of
questions to help determine the necessary equipment, resources, and personnel needed.

Inspection and Damage Assessment
Your property will be carefully inspected for signs of mold using technology designed to detect mold and hidden water sources. Mold feeds on cellulose and water and can be hidden from plain view.

Mold Containment
Various containment procedures will be placed to prevent the spread of mold and isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the
cleanup process.

Air Filtration
Specialized filtration equipment captures microscopic mold spores out
of the air. SERVPRO® technicians utilize powerful air scrubbers and HEPA
vacuums to prevent the spread of these mold spores while the mold remediation is in progress.

Removing Mold
The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. Antifungal and antimicrobial treatments will be used to eliminate mold
colonies and help prevent new colonies from forming. Removing and disposing of mold-infested porous materials, like drywall and flooring, may be necessary to remediate heavy mold growth.

Contents and Belongings
SERVPRO® of Cedar Bluff will clean your furniture, decorative items, curtains, and other restorable items affected by mold. They use a variety of cleaning techniques to clean and sanitize your belongings. They are also trained to remove odors and deodorize using fogging equipment.

Restoration
Depending on the level of mold damage, drywall, subfloors, and other
building materials may be removed. Restoration may involve minor
repairs, such as replacing drywall, painting, and installing new carpet; or
it may entail major repairs such as the reconstruction of various areas or rooms in a home.
SERVPRO® of Cedar Bluff understands mold and mold growth and have the training and equipment to remediate mold in your home.

Improve Your Air Quality

5/2/2018 (Permalink)

HVAC Cleaning

The ventilation system is often
the biggest culprit in poor
indoor air quality, but you
can help change that! Inspecting the
ductwork in your home should be a
high priority. In most cases, the HVAC
the system has been operating for some time
without much attention. Dirty ducts
can circulate odors, contaminants such
as mold, and irritating dust throughout
your home.
A routine part of
SERVPRO® of Cedar Bluff’s
service is inspecting the heating,
ventilation, and air conditioning unit
(HVAC). Keeping the HVAC and
ductwork clean can potentially extend
the life-span of the equipment by
allowing it to operate at peak condition,
which may help save you money. Duct
cleaning may not always be necessary.
SERVPRO® of Cedar Bluff
will inspect your HVAC system and
ductwork and make recommendations
about the best way to address any indoor
air quality concerns. This inspection can
help save you money and provide peace
of mind on the health of your HVAC
system and ductwork.
In some circumstances, such as
after a fire, smoke, or suspected mold
growth, duct cleaning becomes an
essential part of the cleanup process.
In these cases, SERVPRO®
of Cedar Bluff can often restore
the HVAC system and ductwork to pre-damage
condition.
If you have a fuel-burning
furnace, stove, or fireplace, the U.S.
Environmental Protection Agency
(EPA) recommends they be inspected
for proper functioning and be serviced
before each heating season to protect
against carbon monoxide poisoning.

The SERVPRO® of Cedar Bluff Duct Cleaning
The system is proven and cost-efficient.
Unlike the majority of duct cleaning
services, SERVPRO® of Cedar Bluff uses a portable ventilation and air duct cleaning system to examine ductwork and make a clean sweep,
removing years of dust and grime.

The process begins by using
patented equipment, including a
roto-scraper, which automatically
adapts to the duct’s shape and
diameter while traveling through
the duct, removing debris and filth
before vacuuming begins.

Next, a powerful push-pull air
delivery and collection system
transfers the debris from the
ducting to a 16-gallon container.

Air is filtered through a HEPA
filtration system, removing 99.97
percent of the particles in the
airstream. HEPA filters capture
debris and keep the indoor
environment clean.

As an optional process, a sealant or
coating product may be sprayed to
address odor or microbial concerns.
n Filters will either be cleaned
or replaced to remove odor
and dirt.

For more information on duct
cleaning or to schedule an appointment,
contact your local SERVPRO® of West Knoxville.

Moisture In Walls Can Lead To Mold Damage In Knoxville

9/22/2017 (Permalink)

Mold Damage Knoxville

Even small water damages have the potential to cause serious structural and indoor air quality issues over time. The key to avoiding costly problems in the future is to handle every water damage as a threat to your property. SERVPRO of Cedar Bluff has the equipment and training and experience to find and dry unseen water before secondary damages occur. The proper equipment makes a measurable difference in reducing the damage expense during a fire or water loss. When time matters, technology, and equipment must be counted on to perform. SERVPRO of Cedar Bluff will answer your call with rapid action and a full arsenal of drying equipment. Here are a few of the tools used by SERVPRO of Cedar Bluff 
Moisture Sensors are used to detect moisture in carpets, baseboards, and walls
Moisture meters are used to determine the actual moisture content of various materials. The moisture tester provides accurate tester provides accurate readings, allowing SERVPRO of Cedar Bluff to monitor the drying process.
Thermohygrometers measure temperature and relative humidity. When armed with this information, SERVPRO of West Knoxville can calculate and create an environment most conducive to drying. When facing a contaminated water loss, it is not only important to dry the structure, but the structure must also be disinfected and often deodorized.
Ultra-Low-Volume Foggers will atomize liquid deodorizing agents, producing a fine mist that can easily penetrate the site where odor-causing residues may accumulate.
This device can also be used to inject fungicides and disinfectants into wall cavities and other hard-to-reach areas.
Thermal Foggers dispense solvent-based products by creating a dense fog. The go consists of tiny particles of deodorant solution that attached to and neutralize odor-causing particles.

Ready for whatever happens.

9/15/2017 (Permalink)

Ready for whatever happens.

When a storm or disaster strikes, SERVPRO’s Disaster Recovery Team is poised and “Ready for whatever happens.” With a network of more than 1,700 franchise, the SERVPRO System strives to be faster to any size disaster. Strategically located throughout the United States, SERVPRO’s Disaster Recovery Team, is trained and equipped to handle the largest storms.

2016 Houston, TX Flooding: In April, a nearly stationary mesoscale convective system developed over Houston resulting in widespread rainfall at the rate of 2.4 inches per hour. This was a historic flooding event for Harris County which saw a total of nearly 18 inches of accumulated rainfall. The Storm Team dispatched 81 crews to over 360 jobs mitigating over $3 million in damages.

2015 Siberian Express: Record sub-zero temperatures caused major problems for a large portion of the county stretching from Florida to Maine. The Midwest also experienced record breaking low temperature resulting in frozen pipes and ice dams causing major problems for residents. The Storm Team dispatched a total of 257 crews from 108 Franchises to assist local SERVPRO Franchises completing 2000 jobs.

2014 Mid-Atlantic Flooding: Rainfall rates of up to 2 inches per hour caused major flash flooding stretching from Northeast Ohio all the way up to Portland, Maine. Eastern Michigan and Baltimore, Maryland were also impacted and 173 crews mitigated over $4.3 million in damages while assisting the local Franchises.

2014 Polar Vortex: Record low temperatures caused by a break in the North Pole’s polar vortex resulted in an unprecedented freezing event, spanning from east of the Rocky Mountains to as far south as Central Florida, affecting all or part of 39 states and 70% of the SERVPRO Franchises System.

2013 Colorado Floods: Heavy rainfall, with amounts up 17 inches in some areas, resulted in widespread flooding in the Fort Collins, Boulder and surrounding Colorado mountain communities, The Disaster Recovery Team responded with 109 crews from Franchises to assist the local SERVPRO Franchises in the emergency response

2012 Hurricane Sandy: Affecting more than 20 states, Sandy left widespread damage and flooding from Florida stretching the entire eastern seaboard to Maine, The Disaster Recovery Team placed nearly 1000 crews in the affected areas, representing over 300 SERVPRO Franchises from across the country. Teams traveled from as far as Arizona, California, Oregon, and Washington.

Science of Drying

8/7/2017 (Permalink)

Drying Water/Mold Damage

Exploring the Science of Drying

Did you know, there is actually a science behind the process of drying? The knowledge of psychometrics is essential to restoring a water damaged structure to its preloss condition. While your initial reaction may be to grab a few towels to mop up the mess and places a fan or two around the damage is.

What exactly does “speed up Mother Nature” mean? A wet building can often dry naturally because the environment always seeks equilibrium. When materials are wet, moisture will naturally move to drier air on the surface of the material-but only if the air is, indeed dryer. The only problem is, nature takes too long and secondary damages may occur while the building is drying out.

Your local SERVPRO Franchise Professionals have been trained to use top-of-the-line equipment to help Mother Nature along, including equipment to help dry hardwood floors, tough-to-reach spaces inside walls, and much more. Your local SERVPRO Franchise Professionals also use state-of-the-art monitoring equipment and a proven scientific process to help speed the drying of your home or business.

SERVPRO is proud to utilize a newly developed tool SERVPRO DryBook.

The SERVPRO DryBook is a proprietary tool allowing us to capture and track the steps of restoration project according to industry best practices and standards. This ensures your restoration is done properly and efficiently. It also improves results and restores your property at a faster rate, getting you backing your home sooner.

The Silent Killer

8/7/2017 (Permalink)

Make sure you check your smoke detector!

The Silent Killer

Carbon monoxide, considered “the silent killer,” is a gas you cannot see, taste, or smell. It can be created when fuels, such as kerosene, gasoline, coal, natural gas, propane, methane, or wood do not burn properly. According to U.S. Fire Administration, around 150 people die every year from accidental carbon monoxide (CO) poisoning. Often times, it is the result of faulty, improperly used or vented consumer products like furnaces, ranges, water heaters, room heaters, and engine-powered equipment, such as portable generators. However, there are precautions you can take to help protect yourself, your family and your employees from deadly CO fumes.

Reduce the chance of CO exposure in your workplace by performing regular maintenance on equipment and appliances that can produce CO. Consider switching from gasoline-powered equipment to equipment powered by electricity or batteries. Prohibit the use of gasoline-powered engines or tools in poorly ventilated areas.

To protect your home, install carbon monoxide detectors on every level of the home, including outside of all bedrooms. Consider having all fuel-burning heating equipment and chimneys serviced annually by a professional. Use portable generators only in well-ventilated areas away from doors, windows, vents and other openings to prevent fumes from entering the home.