5 Ways To Mitigate Home Water Damage

4/12/2022 (Permalink)

Turn off the water supply.

Five Ways To Limit the Extent Of Water Damage

Water can cause any degree of damage from minor to major at a home located in Karns, TN. Here are five ways to limit the extent of water damage due to any incident from a broken or leaking supply line to a backup of contaminated water from a sewer or outside flooding.

1. Turn Off the Water Supply

If broken pipes or supply line leaks are the cause of damage, shutting off the water supply may reduce the amount of water released into your home. Make sure plumbing is fixed before turning the water back on.

2. Collect Dripping Water

When a leak is dripping anywhere in a home, you can use a bucket or container to keep surfaces from getting soaked. The weight of water may make it necessary to pump out large quantities of standing water.

3. Pump Out Standing Water

The longer water is left standing, the greater the risk of severe primary water damage. Clean water will degrade into contaminated water over the course of just 48 to 72 hours.

4. Tear Out Ruined Building Materials

Soaked drywall or insulation may need to be torn out and replaced during water cleanup. Consult with restoration professionals if you are not sure which materials can be dried.

5. Dry the Affected Area

The entire area affected by a pipe burst or leak should be thoroughly dried. If contaminated water causes damage, it is first necessary to tear out exposed porous materials and disinfect hard surfaces to prevent mold.
These mitigation methods may not apply to every type of water damage. It is important to assess the source of damage and level of contamination at a residence in Karns, TN. If you are not sure which approach to mitigation and cleanup to take, consult with restoration experts who can limit the severity of primary damage and avoid secondary damage.