If you have a fire or water emergency, please call us now at (865) 691-3253

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Tips and Tricks for Preventing Mold Growth

7/22/2021 (Permalink)

Green mold growth on a white wall. When it comes to mold growth, prevention is the best strategy.

Preventing Mold Growth: Tips & Tricks

If you’re looking to protect your business in Norwood, TN, one of the best things you can do is take preventative steps. Even before the building incurs any sort of water damage, there are various things you can do to keep mold out before it has a chance to wreak havoc on your building. Here are three main steps to take:

1. Repair and Clean Gutters

Clogged gutters are common culprits of mold growth. Leaves and other debris can block the water flow and cause it to spill over the sides. It can then stream onto the building below and in through foundation cracks, causing water damage. Once moisture leaks into the building, mold can develop over the next 24 to 48 hours. Depending on the number of trees near the building, you may want to clean your building’s gutters several times a year.

2. Watch the Indoor Humidity

Another mold prevention technique is to keep the humidity inside the building low. Ideally, the humidity should be between 30 and 50 percent. To measure the humidity, you may want to invest in an inexpensive humidity meter. If your business uses appliances that produce moisture, such as stoves and clothes dryers, make sure to vent them to the outside if possible. If your building has a high humidity level, you can also use air conditioners and dehumidifiers to bring that level down. If your business involves stoves or dishwashers, you can use exhaust fans or open windows.

3. Prevent Condensation

Buildup of condensation on windows can be a trigger for mold growth. Window condensation is a sign that your building is not properly ventilated. If you notice your windows sweating, quickly dry the surface to prevent water damage to the surrounding area. A simple trick to combat this is to just open the windows a little. If you can’t do this, turn on a fan or increase the air temperature.

Prevention is the best policy when it comes to mold growth. Use these tips to keep any fungus from forming inside your commercial building.

Other News

View Recent Posts